Ltimas Calculator with knxops

Mechanics Calculator: Simple Shaft with Axial Load and Torque in Imperial Units.

2020-02-24


Assumptions:
1. Elastic behavior.
2. Small dislacement, small strain.
3. Symmetric circular geometry.
4. Subject to perfect torque and axial load at ends.
5. Von Mises failure theory.
Inputs:
Outside Diameter: in
Inside Diameter: in
Length: in
Axial Load: lbs
Torque: ft ∙ lbs
Material Elastic Modulus: kpsi
Material Yield: kpsi
Intermediary & Geometric Outputs:
Torsional Modulus: psi
Cross-Section Area: in2
Moment of inertia : in4
Polar moment of inertia: in4
Stress & Strain Outputs:
Axial stress from force: psi
Max Shear Stress from torque: psi
Maximum Principal Stress: psi
Minimum Principal Stress: psi
Von Mises Stress: psi
Angle of Twist: °
Material Safety Factor:
Factor of Safety:

Design credit knxops.com in cooperation with Ltimas and co.
Copyright © 2019 by Gregory Altimas aka Greg Altimas